Vacuum systems

Compact Automatic Arc Melting Furnace | Automatic vacuum arc melting furnace | Anodic bonding systems | Compact vacuum arc melting furnace | Glove-box gas-circulating purification systems | Induction heating vacuum melting furnace | Gas-volume measuring furnace | Hot press | Vacuum heat treatment furnace (metal heater) | Vacuum heat treatment furnace (carbon heater) | Sputtering systems | Vacuum drying systems | Bulk amorphous | Carbon clusters producer(Arc Discharge Method)

Vacuum drying systems

Vacuum drying systems

Easy operation with front door
Compact and low-priced
The systems is used for drying works under vacuum.

•Standard specification
Drying chamber · Square-type vacuum chamber with front door (water-cooled jacket system)
Dimension ca. W800 X D720 X H570
Material SUS304
· Final pressure: in the order of X 10-4Pa (in vacuum, 1-point for each shelf, 3- points measurement in total)
· Electrode
· Viewport of ф14
· Number of shelves 3
Heating furnace · Heating temperature MAX.300ºC NOR.300ºC
· Uniformity of heating within 10ºC at 200ºC (in vacuum, 1-point for each shelf,
3- points measurement in total)
Effective dimension of shelf ca. W630 X D580, 3-shelves
· Micro pipe heater 1kW X 4=4kW
Vacuum pumping system · Operation automatic
· Diffusion pump 570L/s
· Rotary pump 500L/min
· Vacuum gauge hot-cathode ionization gauge IT-1DA
Pirani gauge PT-1DB
Electric system · Power-source for heating furnace and control components: incorporated into stand.
· Recorder (3-points recording, 100 mm width)
Safety measures · Water-failure relay
Utility · Installing space ca. W900 X D1250 X H1640
· Cooling water 0.13 to 0.15MPa 5L/min or more
· Power capacity 3ф 200V 10kVA

Electronic components, battery material, storage under vacuum.

* Exterior specification shall be subject to change without prior notice for improvement

Copyright(c) 2002-2005 DIAVAC LIMITED Allrights Reserved.